How to improve the strength of AAC block

 Aerated block manufacturers  consider changing mixing process is accelerated hydration of cementitious materials provide strength aerated block method can be called stir strengthened. Overall, the enhanced methods are homogeneous enhancement , strengthening and heat strengthened crushed . Details are as follows :
 

 1 , homogeneous enhancement . Ordinary blender full use of gravity , shear, convection can be aerated block homogeneity of the mixture reaches the macro , but still can not use the small particles uniformly mixed with the mixing water . To further enhance the mixing quality must also be homogeneous enhancement .
 

 2 crushed strengthened. In the mixing process , the cement particles are further pulverized to increase the specific surface area , the surface of new grinding surface having a high activation energy reactions which increase the cement water , to further improve the strength of the block .
 

 3 , heat strengthening. Reasonable increase in material temperature with stirring , to eliminate the damaging effects of heat during curing temperature caused by the block structure , but also accelerate the corrosion of cement hydration , so that the block is improved early strength to shorten curing cycle. Through trial found along the following rule: If fly ash aerated block with hot water mixing, can accelerate the hydration reaction , of course , the temperature must be controlled properly , the temperature is too high , it will condense too fast , causing the hair does not blister , bulk density is too big disadvantage , so in grinding ash aerated block , often in order to grasp the material level to control the temperature of the chemical reaction rate.