safety operation rules of static pressure brick machine

1 Not allowed to put hand into the drum ,when the brick machine is running to avoid accidents.

 

(2) Check clutch, brake , wire rope , etc . should be good , the drum may have no impure material.

 

3 When using the mixer , it must be placed in a solid place to stand or legs with a creel steady, not allowed using a tire.

 

4 people is prohibited under the prevailing or stay under the hopper , make sure hopper is fixed before leave .

 

5 cylinder, valve blocks, valves, tubing and other hydraulic parts, oil leakage should be used to replace the seals , seals and other repair methods or whole substitution , avoid sick to run . Pump , motor oil in operation often hear, see, touch , abnormal , must be stopped excluded .

 

6 Keep the hydraulic system, hydraulic oil pipelines and internal clean .

 

7 Note that high oil temperature affects machine performance.

 

8 . Ensure fixed hopper , cut off the power when check the machine.

 

9 Products vibration pressure time should be strictly controlled , according to the products require adjustments treating time , yield and quality in the best ratio between the sum , if necessary, adjust the feed rate or feeding times to reach equilibrium.

 

10 Pay attention to each step correctly , the screw is loose , the timely detection , should promptly stop adjustment , eliminate hidden dangers. PRESS ensure the safe operation of the interests of manufacturers , but also to ensure the safety of operating personnel to understand and implement comprehensive security operations , in order to better ensure the safety interests of the manufacturer .