1 , To build a baking free brick factory, what is the necessary conditions ? Howq much money would be invested ?
A: As long as you have a local fly ash, slag , coal gangue , slag, sand , stone , construction material waste 1-2 species , with more than 500 square meters of space and some venture capital , baking free brick factory can be founded. Our tailored choices to your investment choices can be 10 thousand to a million and area from 500 square meters to 40 acres, you can choose different scale factories as your demand.
2 , What is the strength of baking free brick compared with clay brick ? How about brick life ?
A: The clay fired brick (240 × 115 × 53mm) label is generally 75 to 100 . The brick use our technology can be 300 and are in strict accordance with the above standard design , its strength is higher than the national standard, the maximum compressive strength up to 35Mpa.Theory and practice has proved that its strength is growing, and has longer life than clay brick.
3 , How can come to lowest investment by choosing the type of raw material for production unburned block brick ? What is the cost for single baking free brick compared to its cost of clay brick ?
A: As long as there are fly ash, slag , coal gangue, sand , stone powder, slag and other industrial waste resources in your local area, make sure which kind of material is the richest, cost effictive , then use this material for production block brick .
4 , hollow block can be only used for walls and infill walls only ?
A: Actually hollow block has been widely used in load-bearing and non- load-bearing walls wall construction ; using professional technology to produce load-bearing hollow block brick walling materials leading products can be produced according to the different needs of the compressive strength of 1.5MPa--35MPa , such as different levels of production , 5.0MPa above for load-bearing walls , below 5.0MPa the bricks can be used for framework and non- load-bearing walls , load-bearing brick block strength can has higher intensity than clay fired brick .
5 ,How to choose the right machine type,the bigger better?
A: First, the selection of equipment according to their funds and market conditions for device configuration. Secondly, according to our experience in the production of some unburned block brick , the same production -scale plant , using a large automatic block production line is often not as composed of several small block machine production line production is guaranteed. A fully automatic block production line will stop production if parts failed to work,, brick line composed by more than one block machine production , even if one fails , the rest can still goes one normal production ; Also the investment is lower than whole automatic brick block production line.
6 , How to choose the brick factory site?
( 1 ) Try to choose factory which is closer from the waste of resources , which can greatly save raw materials transporting and handling fees.
( 2 ) Select site which is convinient to connetc water and electric source , so you can carry out production and sales as soon as possible .
( 3 ) try to choose the site which is far away from the residential areas so to avoid unnecessary disputes.
( 4 ) Reuse the old plant , site or discontinued sintered brick factory , which can reduce the cost of investment .
Brick block machine
News
